26 days old
2018-08-232018-09-22

Automotive Assembly Positions

MobilityWorks
Akron, Ohio 44286
  • Job Type
    Employee
  • Job Status
    Full Time
  • Shift
    1st Shift, 2nd Shift, 3rd Shift
  • Jobs Rated
    132nd

Floor Assembler:

Description:

This position will involve a new flooring system. This flooring is made from extruded aluminum and track (tung and groove). Will involve reading blue prints for floor layouts. The responsibilities are using both metric and standard measurements to cut to length using jig saw, circular saw, plasma cutter, pin extrusions together, and mat the floor.

Expectations:

Must have an eye for identifying problems prematurely to completion. There is no room for error because once the flooring is placed, there is no ability to remove it from the vehicle. Fast paced environment, so individual must be able to produce. Must ensure working safely at all times.

Requirements:

Must be able to lift up to 50 lbs. Must have comfort level, and experience, working with wood tools (circular saws, jig saws) Must be able to read a tape measure; standard and metric.

Target Market: Individuals with background/experience in any of the following - Manufacturing – cell assembly & machining, Vocational School, Automotive – trade school experience, Carpentry

 

 

Tear out Disassembler:

Description:

This position will involve the removal of OEM components (seats, flooring, interior, headliners, etc.). It will also involve the installation of shoulder mounts, wiring, escape hatches and windows.

Expectations:

Must have an eye for identifying problems prematurely to completion. Must be able to follow work instructions. Fast paced environment so individual must be able to produce. Must ensure working safely at all times.

Requirements:

Must be able to lift up to 50 lbs. Must be comfortable drilling/cutting holes into new vans. Must be comfortable using tools such as circular saws, chop saws, drills, panel cutters, caulk guns and tape measures.

Target Market: Individuals with background/experience in any of the following - Manufacturing – cell assembly, Vocational School, Automotive – trade school experience, Carpentry

 

Floor installer:

Description:

This position will involve a new flooring system. This flooring is made from extruded aluminum and track (tung and groove). It will also involve working with precut plywood floors. Required to read an engineered blue print for track and seat layouts. Will be required to use a router to make cuts in wood.

Expectations:

Must have an eye for identifying problems prematurely to completion. There is no room for error because once the flooring is placed, there is no ability to remove it from the vehicle. All wood floors are laser cut to the profiles of the van so all router cuts must be done to blue print. This is a fast paced environment and must be able to produce. Must ensure working safely at all times.

Requirements:

Must be able to lift up to 50 lbs. Must have comfort level with tools such as bandsaws, circular saws, jig saws, routers, screw gun and tape measure.

Target Market: Individuals with background/experience in any of the following - Manufacturing – machining, Vocational School, Automotive – trade school experience, Carpentry

 

 

Interior Installer:

Description:

This position will involve the installation of several types of interiors (OEM, Transit Works and custom made pieces).

Expectations:

Must have an eye for identifying problems prematurely to completion. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs. Must be comfortable working with tools such as screw guns, impacts, air saws, jig saws, table saws, circular saws, utility knives and tape measures. Must be able to work on knees for extended periods of time.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience, Carpentry, custom interior automotive, or carpeting

 

 

Electrical:

Description:

This position will involve the installation of various electrical add-ons such as:

- Interlocks

- Back up cameras

- Back up alarms

- reverse sensors

- Various types of lights

Expectations:

Must have an eye for identifying problems prematurely to completions. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs. Must have experience working with 12v automotive systems. Required to use solder and soldering irons, micro torches, drills, screw guns, utility knives and air saws.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience, Car audio installation, housing electrical, manufacturing electrical assembly

 

 

Options Installer:

Description:

This position will involve the building and installation of seats into a vehicle, steps/running boards, drive shaft loops, wheelchair holders, Oxygen tank holders, safety kits, shoulder tracks, stanchion poles and DOT specifications. Also wheel chair lifts.

Expectations:

Must have an eye for identifying problems prematurely to completion. Fast pace environment and must produce.

Requirements:

Must be able to lift up to 50 lbs. Must be able to follow work instructions and follow installation guidelines. Installs are done based on Federal (and State) Motor Vehicle Safety Standards. Must be comfortable working with vehicle 12 volt systems. Must have knowledge of sockets/ratchets, wrenches, impacts, drills, screw guns, air saws, utility knives and tape measures.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience, Carpentry, Car audio installation, housing electrical, manufacturing electrical assembly, and consumer assembly bicycles/etc.

 

Special Assembler:

Description:

This position will involve the installation of various electrical add-ons such as:

- Interlocks

- Back up cameras

- Back up alarms

- reverse sensors

- Various types of lights

- Bus doors

- Manual door operators

- Collusion avoidance system

- Monitoring systems

- Lifts

 

Expectations:

Must have an eye for identifying problems prematurely to completions. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs. Must have experience working with 12v automotive systems. Required to use solder and soldering irons, micro torches, drills, screw guns, utility knives and air saws. Able to use PC to program equipment to be installed on vehicle.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience or Auto dealer experience, manufacturing electrical assembly

 

AC Installer:

Description:

This position will be installing after-market AC systems, which consist of AC units, heaters, and condensers.

Expectations:

Must have an eye for identifying problems prematurely to completions. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs. Must have experience working with 12v automotive systems. Required to use solder and soldering irons, micro torches, drills, screw guns, utility knives and air saws.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience or Auto dealer experience, manufacturing assembly

 

Floor Steel:

Description:

This position will be welding 14 gauge steel into the floor of vans. In addition, welding seat and track tiles according to the blueprint. Protect OEM interior from weld burns and sparks.

Expectations:

Must have an eye for identifying problems prematurely to completion. Must be able to follow work instructions. Fast paced environment so individual must be able to produce. Must ensure working safely at all times.

Requirements:

Must be able to lift up to 50 lbs. Must be comfortable drilling/cutting holes into new vans. Must be comfortable using tools MIG welder, plasma cutters, grinders, chop saws, drills, and tape measures.

Target Market: Individuals with background/experience in any of the following - Manufacturing – Welding, Vocational School, Automotive – trade school experience, metal fabrication

 

Detailer:

Description:

The position details vans by scrubbing, washing, vacuuming, and cleaning windows. Entry level position – with possible advancement opportunities.

Expectations:

Must have an eye for identifying problems prematurely to completions. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs.

Target Market: Individuals with background/experience in any of the following, Vocational School, Automotive – trade school experience or Auto dealer experience

 

Material Handler:

Description:

The position moves material primarily using lift trucks. Receives and handles inventory counting. Supply production line with parts and materials.

Expectations:

Must have an eye for identifying problems prematurely to completions. Fast pace environment and must be able to produce.

Requirements:

Must be able to lift up to 50 lbs.

Target Market: Individuals with background/experience in material handling in manufacturing or warehousing

 

Requirements

Must be able to lift up to 50 lbs. Must be comfortable drilling/cutting holes into new vans. Must be comfortable using tools MIG welder, plasma cutters, grinders, chop saws, drills, and tape measures.

Categories

Jobs Rated Reports for Automobile Assembler

- Advertisement -

Featured Jobs View All

- Advertisement -

Share this job:

Automotive Assembly Positions

MobilityWorks
Akron, Ohio 44286

Join us to start saving your Favorite Jobs!

Sign In Create Account
Automobile Assembler
132nd2018 - Automobile Assembler
Overall Rating: 132/220
Median Salary: $30,690

Work Environment
Fair
122/220
Stress
Medium
114/220
Growth
Very Poor
220/220
Powered ByCareerCast